| Product Image |
Item Name- |
Price |
|
Beer dispensing tap. Fitted with flow control nozzle. This is ideal for use with your cornelius keg set up. The tap comes with a 6mm nipple attached so all you need is the gas tubing to connect to your black beer disconnect. Can be used for building your kegerator. |
€85.00
Add:
|
|
This gauge shows the pressure for carbonating and dispensing beer from a keg. The other gauge displays how much CO2 is left in the tank. Comes with barb and shut off valve. |
€45.95
... more info
|
|
One gauge shows the pressure for carbonating and dispensing in the keg. The other gauge displays how much CO2 is left in the tank. This regulator has a splitter so you can run two kegs at the one time off the same bottle of gas. |
€79.95
... more info
|
|
CO2 regulator with 2 manometers Solid build pressure regulator for CO2, equipped with a pressure exit manometer of 0-3 bar and an input pressure manometer for content indication of the CO2 cylinder. With over-pressure protection. Direct adjustable exit pressure (0-3 bar). Connection: tube holder 8 mm. |
€89.95
Add:
|
|
Ideal for dispensing beers and wines under pressure. CO2 gas is injected in through the post marked IN on top of the keg and is connected via a Grey Disconnect. This keg can be presurised to over 100psi making it much more relaible than the standard plastic keg. It has approximately a 19 litre capacity. |
€150.00
... more info
|
|
Contains 1 lid O-ring, 2 Dip tube O-rings and 2 Ball Lock post rings |
€5.50
... more info
|
|
This small tap connects to the black disconnect on your Cornelius keg and is ideal for dispensing. |
€22.35
... more info
|
|
With ¼” thread. |
€13.45
Add:
|
|
|
€13.95
... more info
|
|
This is a stainless steel keg, originally designed to dispense soft drinks syrups and has been fully reconditioned making it ideal for dispensing beers and wines under pressure. CO2 gas is injected in through the post marked IN on top of the keg and is connected via a Grey Disconnect. This keg can be presurised to over 100psi making it much more relaible than the standard plastic keg. It has approximately a 19 litre capacity. |
€65.00
... more info
|
|
Small, portable and no tanks or hoses. This CO2 charger with it's trigger valve allows you to precisly control the amount of gas injected into the keg. |
€30.49
... more info
|
|
These 16 gm gas bulbs are designed to work with the Cornelius Keg CO2 Charger. (5 per pack) |
€8.95
Add:
|
|
This quick fit connector allows you to connect a gas line to your keg. Using a gas supply gives you the pressure needed to dispence your beer and also gives you the option or force carbonating your beer. |
€14.95
Add:
|
|
This quick fit connector allows you to connect a tap to your keg for dispensing. |
€14.95
Add:
|
|
|
€1.00
Add:
|
|
Fits the Cornelius Keg lid providing an airtight seal. |
€3.49
... more info
|
|
|
|
€1.00
Add:
|
