New Products
Easy to clean, thanks to the large opening. The lid hermetically seals the container and is equipped with a hole for an airlock. Tap, bung, airlock... more info
€110.00
Sale €99.00
Save: 10%
Sale €99.00
Save: 10%
Archer is a registered trade mark of Charles Faram & Co Ltd and is from the Charles Faram Hop Development Programme. Use in brewing ... more info
€3.95
Sale €3.56
Save: 10%
Sale €3.56
Save: 10%
After all of your bottles have been safely filled and corked, you can choose to put capsules over the neck of the bottle. While not necessary to... more info
€2.25
Sale €2.03
Save: 10%
Sale €2.03
Save: 10%
The Advanced Cooling Edition includes the Grainfather Conical Fermenter Pro Edition, Glycol Chiller, 3 litres Glycol and grain coat as a bundle, at a... more info
€1,700.00
Sale €1,530.00
Save: 10%
Sale €1,530.00
Save: 10%
Out Of Stock
We are excited to announce we now have Glycol Chillers available for purchase! Control your fermentation temperature accurately, every time! With the... more info
€985.00
Sale €886.50
Save: 10%
Sale €886.50
Save: 10%
A high yielding, high alpha acid American bittering hop. Also known by the trade name Columbus, which is one of the Three Cs along with Cascade and... more info
€4.95
Sale €4.46
Save: 10%
Sale €4.46
Save: 10%
A high yielding, high alpha acid American bittering hop. Also known by the trade name Columbus, which is one of the Three Cs along with Cascade and... more info
€4.25
Sale €3.83
Save: 10%
Sale €3.83
Save: 10%
Spirits Range Air Still - Infusion Basket. This stainless-steel basket is suitable to infuse your base spirit with botanicals such as lemon or orange... more info
€14.95
Sale €13.46
Save: 10%
Sale €13.46
Save: 10%
Replacement filtering screen for the Mac Daddy Bouncer Inline Filter system, one with a 980 micron mesh and the other a 480 micron mesh to give you... more info
€22.00
Sale €19.80
Save: 10%
Sale €19.80
Save: 10%
Replacement filter screen for the Bouncer Classic Inline Beer Filter system, one with 304 micron mesh and the other a 178 micron mesh to give you the... more info
€15.95
Sale €14.36
Save: 10%
Sale €14.36
Save: 10%
Out Of Stock
Bouncer Classic Inline Beer Filter allows you to brew better tasting, clearer beer without using fining additives or needing pumps so there is less... more info
€39.95
Sale €35.95
Save: 10%
Sale €35.95
Save: 10%
82,944 different beer kits in one. Yes that’s how many different beer kits are possible with this kit. It can be a blonde ale, an IPA, an English... more info
€34.00
Sale €30.60
Save: 10%
Sale €30.60
Save: 10%
Mash paddle for beer brewers, for stirring wort during mashing. With rounded corners to avoid scratches and height markings to enable easy measuring... more info
€19.95
Sale €17.96
Save: 10%
Sale €17.96
Save: 10%
Fermonster lid with hole for your FerMonster™ 23 and 27 litres. *** NO O-RING IS INCLUDED *** more info
€8.75
Sale €7.87
Save: 10%
Sale €7.87
Save: 10%
Out Of Stock
Rinses your bottles in only a few seconds ! It´s so easy : connect it to a water tap push the bottle onto it during a few seconds and …... more info
€32.95
Sale €29.65
Save: 10%
Sale €29.65
Save: 10%
Use the Keg Jumper to push beer or sanitizer from one keg to the next. Ideal for transferring beer off settled yeast to another keg or... more info
€20.00
Sale €18.00
Save: 10%
Sale €18.00
Save: 10%
These 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 3/4" NPT threaded components. These... more info
€1.00
Sale €0.90
Save: 10%
Sale €0.90
Save: 10%
Out Of Stock
Thermowells are installed onto brewing pots and kettles to allow a thermometer probe or even a temperature controller sensor to be inserted through... more info
€16.95
Sale €15.26
Save: 10%
Sale €15.26
Save: 10%
Use this 2 inch all thread nipple to add a valve to a kettle or mash tun or to add bulkhead to anything you like. With the all thread nipple at 2.5... more info
€14.00
Sale €12.60
Save: 10%
Sale €12.60
Save: 10%
Bulkhead fitting for kettles. Can be used for connecting your ball valve tap and your bazooka screen when constructing your homebrew kettle. more info
€13.00
Sale €11.70
Save: 10%
Sale €11.70
Save: 10%
The Bulkhead Fitting is a stainless steel bulkhead connector used for cooler conversions. The total length is 2 1/2". This bulkhead is for... more info
€10.00
Sale €9.00
Save: 10%
Sale €9.00
Save: 10%
Out Of Stock
Out Of Stock
This Carbonating Stone with 1/4″ MFL works great for both carbonating and oxygenating. In order to carbonate in your cornelius keg, simply connect... more info
€14.95
Sale €13.46
Save: 10%
Sale €13.46
Save: 10%