Success
check_circle

Successfully added selected product(s) to the cart!

Continue shopping   Go to Cart

Barrel Spares


Co2 Bulbs 8g Heimo (10 per Box)
Spare 8g CO2 gas bulbs for your CO2 gas injector. more info
€8.25
Add:
Hambleton bard S30 8g bulb holder
The new stainless steel insert S30 holder for 8g bulbs, It has long been a problem that the threads wear out in a normal plastic or nylon bulb holder... more info
€4.95
Add:
Keg Cap 4 inch Drilled - No Valve
Replacement Keg Cap 4 inch Drilled - No Valve more info
€5.95
Add:
King Keg 4" S30 Pin Valve RB Cap + 'O' Ring
Out Of Stock
This cap will fit both the King Keg Bottom and Top Tap Barrels. Comes with O Ring and inlet/pressure relief valve. more info
€17.95
King Keg 4" S30 RB Cap + 'O' Ring
This cap will fit both the King Keg Bottom and Top Tap Barrels. Comes with O Ring and inlet/pressure relief valve. more info
€19.95
Add:
Latstock Beer Float
Out Of Stock
This cap will fit both the King Keg Bottom and Top Tap Barrels. Comes with O Ring and inlet/pressure relief valve. more info
€12.00
N2O Bulbs 8g Heimo (10 per Box)
10 disposable 8 gram bulbs filled with Nitrogen gas. Perfect for stouts, and all draught beers. Gives a much smoother beer that's much easier to... more info
€6.50
Add:
Pin Valve S-30
S30 replacement valve with pin (8g CO2 bulbs only) as used on the S30 cap fitted to most pressure barrels for homebrew use, such as the Rotokeg,... more info
€14.95
Add:
S30 Pin Connector (Hambleton Bard)
Out Of Stock
The new S30 Valve for your keg comes in high grade stainless steel. The S30 valve is equipped with a small piercing pin if you want to use 8g CO2... more info
€14.00
Sealing Wax for Wooden Casks 500g
Sealing wax Natural vegetable wax for closing small leaks in wooden barrels. Can be used on wet wood. Content: 500 g. more info
€11.95  €8.36
Save: 30%
Add:
Spare Plastic Bulb Holder
A replacement bulb holder for the microbrewery. Colour may vary more info
€4.00
Add:
Stainless Steel Pin Valve C/W Red Plastic Bulb Holder
A replacement bulb holder for the microbrewery and S30 steel pin valve. more info
€14.95
Add:
Young's Cap/ Injector/ Relief Valves Spare
Out Of Stock
A repair kit for use with a King Keg 4 inch Cap or a Basic Barrel 2 inch Cap. The pack contains a white outlet rubber for the brass valve and all the... more info
€5.95
Young's STD CO2 Inlet / Outlet Valve (Brass)
A valve for injecting gas using an S30 Cylinder. more info
€14.00
Add: